INSTALLATION OF SYNTHETIC GRASS

Install the Italgreen synthetic grass in 4 simple steps.

With the Italgreen Landscape synthetic grass, and its easy and quick installation process, you only need to take a few steps to ensure you have an ever-green garden!
You do not have to mow or water the lawn and you can use the time you save to enjoy your new outdoor space. This is how to do it:

Preparation of the soil

First, you need to prepare the surface which will support your new synthetic lawn:

Remove the natural grass, digging for at least 5 cm, so as to remove the roots of the grass;
Level the soil getting rid of rocks, grass, concrete etc;
Level out any potential holes in the ground, if necessary;
Place the anti-vegetation layer, in order to inhibit the growth of natural grass;
Lay out the gravel until you reach the desired height and level it using a screed (usually a couple of centimeters below the walking level);
Press the gravel by hand or with a stomper.

Installing the grass

The second step consists of simply laying the synthetic grass on the entire surface you want to cover:

Unroll the Italgreen synthetic grass according to the pre-established order (mind the brushing, all the blades must face the same direction!);
Trim the sides around sidewalks, pools, steps, poles, hydrants… for a professional result, work carefully, using a cutter;
Lift the sides of the synthetic grass and lay the special tape that will join the various grass carpets;
Prepare the bi-component glue and spread it along the tape, making sure you keep the tape in place;
Now you can delicately join the sides of the synthetic grass, paying attention not to leave strings of grass in the middle. Press on the glue using your feet.

Infill and Brushing

Now that your synthetic lawn is in place and anchored to the soil, you only need to go through a few more steps:

Using a shovel, lay out the infill sand in a homogeneous way, avoiding lumps;
Using a broom, brush the lawn against the direction of the grass blades, until you no longer see sand on the surface.

NB: The design of the Italgreen synthetic grass allows you to skip the infilling. However, we recommend that infill sand should always be used, in order to give stability to the carpet and to keep the grass upright over time.

Complete transformation!

Your new synthetic lawn is ready for you to relax or have fun on. What are you waiting for?

Set your main menu in Appearance > Menus

INSTALLATION OF SYNTHETIC GRASS

Install the Italgreen synthetic grass in 4 simple steps.

Preparation of the soil

Installing the grass

Infill and Brushing

Complete transformation!

Artificial grass for gardens

Like Us On Facebook

Contact us for more information

Set your main menu in Appearance > Menus

INSTALLATION OF SYNTHETIC GRASS

Install the Italgreen synthetic grass in 4 simple steps.

Preparation of the soil

Installing the grass

Infill and Brushing

Complete transformation!

Like Us On Facebook

Search engine